Ductile Iron Grooved Coupling and Fittings
ASME B16.3,ASME B16.14,ASME B16.39,
BS EN 10242,BS143,BS1256
ISO 49,DIN 2985
Elbow,Tees,Crosses,Bends,Unions,Bushing,Lateral Braches,Sockets,Nipples,Hexagon/Round,Caps,Plugs,Locknuts,Flanges,Side outlet Tees,Side Outlet Elbows and etc
Ductile Iron Grooved Coupling and Fittings Features：
•Do not loosen or tighten fittings when system is pressurized.
•Make sure that the tubing rests firmly on the shoulder of the port.
•Always leave enough straight length of the tubing for the fittings.
•Always use an insert for extremely soft plastic tubing.
•Material of the metal tubing should be softer than that of the fitting.
For example, stainless steel tubing should not be used with brass fittings. When tubing and fittings are made of the same material, the tubing must be fully annealed.
Suitable for fire piping system, air, steam, water,gas, oil , home decoration , equipment and so on
1)JIzhong boxes ,non-wood pallets (1CBM)with plastic film,30boxes per pallet at most;
2)National boxes,non-wood pallets(1CBM)with plastic film ,30boxes per pallet at most;
3)Non-wood cases(1CBM). We can also pack products as per customer's requirement.
our company as a pipe fitting manufacturers
,if you need that pls contact us.